Brackets – Dotworkz https://www.dotworkz.com Video Surveillance Hardware & Accessories Thu, 15 Nov 2018 17:40:26 +0000 en-US hourly 1 https://wordpress.org/?v=6.5.2 Ceiling Mount for Dotworkz D2, D3, and S-Type Camera Housings (BR-CM1) https://www.dotworkz.com/project/ceiling-mount-for-dotworkz-d2-d3-and-s-type-camera-housings/ Thu, 15 Nov 2018 17:38:17 +0000 https://www.dotworkz.com/?post_type=dt_portfolio&p=7951

Ceiling Mount for Dotworkz D2, D3, and S-Type Camera Housings (BR-CM1)

The Dotworkz Ceiling Mount is the solution for you need to mount a security camera and there is no wall to be found or when the wall is not where you want to mount the camera.

Weighing in at 5 lbs, this Ceiling Mount is made from heavy duty 13gg Stainless Steel (304) and finished with White Powder Coat paint. The Dotworkz Ceiling Mount is compatible with all Dotworkz D2, D3, and S-Type camera housings. The Ceiling Mount is 6.7″w x 3.0″d x 22.0″h.

Ceiling Mount for Dotworkz D2, D3, and S-Type Camera Housings (BR-CM1) Ceiling Mount for Dotworkz D2, D3, and S-Type Camera Housings (BR-CM1) Ceiling Mount for Dotworkz D2, D3, and S-Type Camera Housings (BR-CM1) Ceiling Mount for Dotworkz D2, D3, and S-Type Camera Housings (BR-CM1) Ceiling Mount for Dotworkz D2, D3, and S-Type Camera Housings (BR-CM1) Ceiling Mount for Dotworkz D2, D3, and S-Type Camera Housings (BR-CM1) Ceiling Mount for Dotworkz D2, D3, and S-Type Camera Housings (BR-CM1) Ceiling Mount for Dotworkz D2, D3, and S-Type Camera Housings (BR-CM1) Ceiling Mount for Dotworkz D2, D3, and S-Type Camera Housings (BR-CM1) Ceiling Mount for Dotworkz D2, D3, and S-Type Camera Housings (BR-CM1) Ceiling Mount for Dotworkz D2, D3, and S-Type Camera Housings (BR-CM1)

Highlighted Features:

  • Stainless Steel Construction
  • Powder Coated
  • Indoor & Outdoor Ready
  • Compatible with all D2, D3, and S-Type camera housings
]]> Angle Correction Pole Mount Kit Extended and Tilt Plate from Dotworkz (BR-ACPM2) https://www.dotworkz.com/project/angle-correction-pole-mount-kit-extended-tilt-plate-dotworkz-br-acpm2/ Fri, 27 Oct 2017 20:55:26 +0000 http://www.dotworkz.com/?post_type=dt_portfolio&p=7364

Angle Correction Pole Mount Kit Extended and Tilt Plate from Dotworkz (BR-ACPM2)

This is the Replacement Part for the Angle Correction Pole Mount Kit Extended and Tilt Plate from Dotworkz (BR-ACPM2).

Angle Correction Pole Mount Kit Extended and Tilt Plate from Dotworkz (BR-ACPM2))
]]> Tilt Plate for the Angle Correction Pole Mount from Dotworkz (BR-ACPM) https://www.dotworkz.com/project/tilt-plate-angle-correction-pole-mount-dotworkz-br-acpm/ Fri, 27 Oct 2017 20:50:41 +0000 http://www.dotworkz.com/?post_type=dt_portfolio&p=7360

Tilt Plate for the Angle Correction Pole Mount from Dotworkz (BR-ACPM)

This is the Replacement Part for the Tilt Plate for the Angle Correction Pole Mount from Dotworkz (BR-ACPM).

Tilt Plate for the Angle Correction Pole Mount from Dotworkz (BR-ACPM)
]]> 12V Outdoor Power Pack and Pole Mount Kit for Cooldome Camera Enclosures with Xero NVR inside from Dotworkz (KT-CDR-3) https://www.dotworkz.com/project/12v-outdoor-power-pack-pole-mount-kit-cooldome-camera-enclosures-xero-nvr-inside-dotworkz-kt-cdr-3/ Fri, 27 Oct 2017 20:32:55 +0000 http://www.dotworkz.com/?post_type=dt_portfolio&p=7352

12V Outdoor Power Pack and Pole Mount Kit for Cooldome Camera Enclosures with Xero NVR inside from Dotworkz (KT-CDR-3)

Power your Dotworkz COOLDOME™ and Xero NVR safely and easily with the 12V Outdoor Power Pack and Pole Mount Kit for Cooldome Camera Enclosures with Xero NVR inside from Dotworkz (KT-CDR-3). Provides a clean integration of COOLDOME™ external power supplies to D2 Cooldome, D3 Single Cooler Cooldome, or S-Type Cooldome Camera Enclosures. This external power supply bracket provides quick mount attachment to the back of the D2 Cooldome, D3 Single Cooler Cooldome, or S-Type Cooldome Camera Enclosures.and can be mounted onto any size structural post or pole utilizing 3 band straps.

12V Outdoor Power Pack and Pole Mount Kit for Cooldome Camera Enclosures with Xero NVR inside from Dotworkz (KT-CDR-3) 12V Outdoor Power Pack and Pole Mount Kit for Cooldome Camera Enclosures with Xero NVR inside from Dotworkz (KT-CDR-3) 12V Outdoor Power Pack and Pole Mount Kit for Cooldome Camera Enclosures with Xero NVR inside from Dotworkz (KT-CDR-3) 12V Outdoor Power Pack and Pole Mount Kit for Cooldome Camera Enclosures with Xero NVR inside from Dotworkz (KT-CDR-3) 12V Outdoor Power Pack and Pole Mount Kit for Cooldome Camera Enclosures with Xero NVR inside from Dotworkz (KT-CDR-3)

Highlighted Features:

  • AC input auto range
  • IP67 rated power supply
  • Built-in active PFC function
  • Protections: Short circuit / Overload / Over voltage
  • Over Temperature Protection:105°C ±5°C (TSW1),
  • Shut down O/P Voltage, Repower after cooling
  • Fixed switching frequency at 60KHz
  • 100% full load burn-in test
  • Low cost, high reliability
]]> 12V Outdoor Power Pack and Pole Mount Kit for Cooldome Camera Enclosures from Dotworkz (KT-CDR-2) https://www.dotworkz.com/project/12v-outdoor-power-pack-pole-mount-kit-cooldome-camera-enclosures-dotworkz-kt-cdr-2/ Fri, 27 Oct 2017 20:26:06 +0000 http://www.dotworkz.com/?post_type=dt_portfolio&p=7348

12V Outdoor Power Pack and Pole Mount Kit for Cooldome Camera Enclosures from Dotworkz (KT-CDR-2)

Power your Dotworkz COOLDOME™ and electronic components safely and easily with the 12V Outdoor Power Pack and Pole Mount Kit for Cooldome Camera Enclosures from Dotworkz (KT-CDR-2). Provides a clean integration of COOLDOME™ external power supplies to D2 Cooldome, D3 Single Cooler Cooldome, or S-Type Cooldome Camera Enclosures. This external power supply bracket provides quick mount attachment to the back of the D2 Cooldome, D3 Single Cooler Cooldome, or S-Type Cooldome Camera Enclosures.and can be mounted onto any size structural post or pole utilizing 3 band straps.

12V Outdoor Power Pack and Pole Mount Kit for Cooldome Camera Enclosures from Dotworkz (KT-CDR-2) 12V Outdoor Power Pack and Pole Mount Kit for Cooldome Camera Enclosures from Dotworkz (KT-CDR-2) 12V Outdoor Power Pack and Pole Mount Kit for Cooldome Camera Enclosures from Dotworkz (KT-CDR-2) 12V Outdoor Power Pack and Pole Mount Kit for Cooldome Camera Enclosures from Dotworkz (KT-CDR-2) 12V Outdoor Power Pack and Pole Mount Kit for Cooldome Camera Enclosures from Dotworkz (KT-CDR-2) 12V Outdoor Power Pack and Pole Mount Kit for Cooldome Camera Enclosures from Dotworkz (KT-CDR-2) 12V Outdoor Power Pack and Pole Mount Kit for Cooldome Camera Enclosures from Dotworkz (KT-CDR-2) 12V Outdoor Power Pack and Pole Mount Kit for Cooldome Camera Enclosures from Dotworkz (KT-CDR-2) 12V Outdoor Power Pack and Pole Mount Kit for Cooldome Camera Enclosures from Dotworkz (KT-CDR-2) 12V Outdoor Power Pack and Pole Mount Kit for Cooldome Camera Enclosures from Dotworkz (KT-CDR-2) 12V Outdoor Power Pack and Pole Mount Kit for Cooldome Camera Enclosures from Dotworkz (KT-CDR-2) 12V Outdoor Power Pack and Pole Mount Kit for Cooldome Camera Enclosures from Dotworkz (KT-CDR-2) 12V Outdoor Power Pack and Pole Mount Kit for Cooldome Camera Enclosures from Dotworkz (KT-CDR-2) 12V Outdoor Power Pack and Pole Mount Kit for Cooldome Camera Enclosures from Dotworkz (KT-CDR-2)

Highlighted Features:

  • AC input auto range
  • IP67 rated power supply
  • Built-in active PFC function
  • Protections: Short circuit / Overload / Over voltage
  • Over Temperature Protection:105°C ±5°C (TSW1),
  • Shut down O/P Voltage, Repower after cooling
  • Fixed switching frequency at 60KHz
  • 100% full load burn-in test
  • Low cost, high reliability
]]> Xero NVR Integration Kit for D2 or D3 Camera Enclosures from Dotworkz (KT-XERO) https://www.dotworkz.com/project/xero-nvr-integration-kit-d2-d3-camera-enclosures-dotworkz-kt-xero/ Fri, 27 Oct 2017 20:07:17 +0000 http://www.dotworkz.com/?post_type=dt_portfolio&p=7339

Xero NVR Integration Kit for D2 or D3 Camera Enclosures from Dotworkz (KT-XERO)

The Xero NVR Integration Kit for D2 or D3 Camera Enclosures from Dotworkz (KT-XERO) integrates our Xero and Xero 2.0 NVR modules into our D2 or D3 camera enclosure systems.

Xero NVR Integration Kit for D2 or D3 Camera Enclosures from Dotworkz (KT-XERO)

Highlighted Features:

  • Integrates our Xero and Xero 2.0 NVR modules into any D2 or D3 camera enclosure
]]> D2 or D3 Raised Rear Accessory Bracket for Antennas and Strobe Lights from Dotworkz (BR-ACC2) https://www.dotworkz.com/project/d2-d3-raised-rear-accessory-bracket-antennas-strobe-lights-dotworkz-br-acc2/ Fri, 27 Oct 2017 17:57:51 +0000 http://www.dotworkz.com/?post_type=dt_portfolio&p=7314

D2 or D3 Raised Rear Accessory Bracket for Antennas and Strobe Lights from Dotworkz (BR-ACC2)

The D2 or D3 Raised Rear Accessory Bracket for Antennas and Strobe Lights from Dotworkz (BR-ACC2) attaches to rear mounting pattern of the D2/D3 enclosures. Used for external components such as the Strobe Light.

D2 or D3 Raised Rear Accessory Bracket for Antennas and Strobe Lights from Dotworkz (BR-ACC2)

Highlighted Features:

  • Attaches to rear mounting pattern of the D2/D3 enclosures
  • Used for external components such as Strobe Lights or Antennas
]]> Compact Parapet Mount Bracket for D-Series Camera Housings from Dotworkz (BR-CPM1) https://www.dotworkz.com/project/compact-parapet-mount-bracket-d-series-camera-housings-dotworkz-br-cpm1/ Fri, 27 Oct 2017 16:35:40 +0000 http://www.dotworkz.com/?post_type=dt_portfolio&p=7264

Compact Parapet Mount Bracket for D-Series Camera Housings from Dotworkz (BR-CPM1)

The Compact Parapet Mount Bracket for D-Series Camera Housings from Dotworkz (BR-CPM1) is designed to be used on roof top parapets. The CPM1 flat mount surface is compatible with all Dotworkz D-Series.

Compact Parapet Mount Bracket for D-Series Camera Housings from Dotworkz (BR-CPM1)

Highlighted Features:

  • 50lb Load Rating
  • All Aluminum construction
  • Adjustable in 45 degree increments
]]> Emergency Callbox Raised Mount for D-Series Camera Housings from Dotworkz (BR-ECB1) https://www.dotworkz.com/project/emergency-callbox-raised-mount-d-series-camera-housings-dotworkz-br-ecb1/ Fri, 27 Oct 2017 16:29:58 +0000 http://www.dotworkz.com/?post_type=dt_portfolio&p=7260

Emergency Callbox Raised Mount for D-Series Camera Housings from Dotworkz (BR-ECB1)

The Emergency Callbox Raised Mount for D-Series Camera Housings from Dotworkz (BR-ECB1) opens up the ability to attach a complete stand alone camera system to new call box installations or to existing call box infrastructure. The bracket safely raises the Dotworkz D3 or D2 above the call box to provide views to the surrounding area and phone handset area. The ECB1 is compatible with all Dotworkz D-Series.

Emergency Callbox Raised Mount for D-Series Camera Housings from Dotworkz (BR-ECB1)

Highlighted Features:

  • Sturdy aluminum construction
  • Fits all Dotworkz D series outdoor housings
  • Works with all major Call box brands
  • US designed and built
]]> Adjustable Parapet Mount Bracket from Dotworkz (BR-APM1) https://www.dotworkz.com/project/adjustable-parapet-mount-bracket-dotworkz-br-apm1/ Fri, 27 Oct 2017 16:24:47 +0000 http://www.dotworkz.com/?post_type=dt_portfolio&p=7256

Adjustable Parapet Mount Bracket from Dotworkz (BR-APM1)

The Adjustable Parapet Mount Bracket from Dotworkz (BR-APM1) is designed for multiple locations. The mount can be located on surfaces that are at odd angles such as pitched roofs, angled soffits or lofted ceilings. The multiple angle articulation simplifies camera aiming and makes the mount simple to install. It is designed to withstand harsh environments and can be customized with a variety of finishes to suit customer requirements. The APM1 is compatible with all Dotworkz D-Series.

Adjustable Parapet Mount Bracket from Dotworkz (BR-APM1) Adjustable Parapet Mount Bracket from Dotworkz (BR-APM1) Adjustable Parapet Mount Bracket from Dotworkz (BR-APM1)

Highlighted Features:

  • 50lb Load Rating
  • Aluminum/Steel construction
  • Versatile Installation Options
  • Designed to Simplify Camera Aiming
]]>