MVP comes included with all S-Type, D2 or D3 Heater Blower, Tornado, and Ring of Fire models.
Dotworkz Systems takes innovation to the next level with its Multi Volt Platform (MVP) power solution for site power and camera power compatibility making it almost universally compatible. The MVP system is designed to greatly simplify ordering and installation of surveillance camera equipment where variable voltages can make planning difficult.
This system allows for multiple input voltage scenarios for stepping down to multiple camera voltage options in one “ready to install” unit, making it a professional grade outdoor camera setup that is simpler than ever.
Multi Volt Platform/MVP Brochures
Heater & Blower (HB) MVP
D2 HB MVP Brochure
D3 HB MVP Brochure
S-Type HB MVP Brochure
Tornado (TR) MVP
D2 TR MVP Brochure
D3 TR MVP Brochure
S-Type TR MVP Brochure
Ring of Fire (RF) MVP
D2 RF MVP Brochure
D3 RF MVP Brochure
S-Type RF MVP Brochure
Adding an MVP is as EASY as 1-2-3
1: Connect input power source
2: Plug in camera power
3: Secure & Use
Multi Volt Platform is designed to make installing, ordering and setting up outdoor camera systems simpler start to finish. Dotworkz has made the MVP so that our versatile housings work with all brands of security, web cameras and broadcast cameras on the market today.
MVP Step-by-Step Setup Guide for Dotworkz Housings
Gather all hardware and tools
Please read both camera and Dotworkz manuals before beginning. This photo shows potential hardware and components you will need to install an analog or IP camera into any D2 MVP outdoor enclosure system.
External power source
Determine your power source 110-220 or 24VAC/DC. Have a qualified electrician connect an external power source to D2 terminal power block. See manual for more details. All cable and connections are made inside your Dotworkz enclosure.
Connecting Power to Dotworkz MVP
MVP provides step down voltage to supply camera power for 12VDC and 24VDC Cameras.
Connecting the MVP to your Camera
The MVP comes prewired with a 12VDC power cable ready to plug into the most common camera models. *If your camera’s power connector is a Terminal connector simply remove the angle Barrel plug.
IP68 Cable glands
Run power cable through existing D2 cable gland; to add another cable remove the plug and install an included second cable gland, making sure to seal it tight. Note: If using conduit be sure to seal it to avoid water moisture.
Tighten cable glands
Make sure to have only one cable per gland and tighten down completely to seal the D2 enclosure from the outside.
Close the Cover
Close the enclosure and tighten all screws using a philips screw driver. The D2 can be mounted directly to a wall or to a pole mount adapter.
Leave a drip loop
Make sure to create a U shape drip loop with the cables to prevent water from pooling and possibly seeping inside
Ready for Instant Use
Your outdoor camera system is now ready to secure the area. MVP made it easy as 1-2-3.
Custom manufactured designs from start to finish.
Serving Transportation, Manufacturers, Specialists, Integrators, Accessories, and more!
Get your product to your market faster!
At Dotworkz we are recognized as a leader in OEM: build your next security housing system with Dotworkz OEM.
Product Guide
The Dotworkz product line is optimized for a wide range of video cameras including all powerful Pan Tilt and Zoom (PTZ), mini dome, fixed, static, IP, as well as the latest HD/Megapixel network cameras.
